Cutting bushes ISO 8977 A

Material: HSS

Execution:
hardened and tempered, ground to tolerance inside and outside, with lead-in chamfer. 

Hardness: HRC 62 ┬▒2

 

Ordering example for a cutting bush, type A with d1 = 5.0 mm and outside diameter D = 10 mm and overall length = 25 mm:
Cutting bush ISO 8977 A 5,0 x 10 x 25

Bore d +0,02incrementD
n5
d1
max
L
+ 0,5
l
min.
Euros ea.L
+ 0,5
Euros ea.L
+ 0,5
Euros ea.L
+ 0,5
Euros ea.
from1,0to2,40,152,816215,512016,862518,9632-
from1,6to3,00,163,516315,262016,702518,2432-
from2,0to3,50,184,016414,482015,512516,813218,77
from3,0to5,00,1105,816414,302015,142516,323218,30
from4,0to7,20,1138,0-5-2015,742517,463219,91
from6,0to8,80,1169,5-5-2015,742517,463219,91
from7,5to11,30,12012,0-8-2016,862518,723221,63
from11,0to16,60,12517,3-8-2017,532519,673223,25
from15,0to20,00,53220,7-8-2033,562536,963244,11
from18,0to27,00,54027,7-8-2036,372539,943245,91
from26,0to36,00,55037,0-8-2039,942544,113248,29

Increment of the bore:

0,1 mm up to  d 16,6 mm and D 25 mm. 
0,5 mm from   d 15,0 mm und D 32 mm.