DIN 9845 B

Material: HSS

Execution:
hardened and tempered, ground to tolerance inside and outside, with lead-in chamfer.

Hardness: HRC 62 ±2

Ordering example for a cutting bush, type B with d1 = 5 mm and L = 28 mm:
Cutting bush DIN 9845 B 5.0 x 28

Bore d1 H8				d2 k6	d3	short L1	Euros ea.	long L1	Euro ea.	d4	short L2	short L3	long L2	long L3	t
			1,0	5	7	20	15,20	28	17,56	d1+0,3	18	16	26	24	0,01
from	1,1	to	2,0	6	8	20	10,17	28	13,36	d1+0,3	17	16	25	24	0,01
from	2,1	to	3,0	7	9	20	8,61	28	10,82	d1+0,5	17	16	25	24	0,01
from	3,1	to	4,0	8	10	20	8,61	28	10,82	d1+0,5	17	16	25	24	0,01
from	4,1	to	5,0	10	12	20	8,61	28	10,82	d1+0,7	16	16	24	24	0,01
from	5,1	to	6,0	12	14	20	8,61	28	10,82	d1+0,7	16	16	24	24	0,02
from	6,1	to	8,0	15	17	20	9,29	28	11,67	d1+0,7	16	16	24	24	0,02
from	8,1	to	10,0	18	20	20	10,25	28	12,37	d1+1,0	16	16	24	24	0,02
from	10,1	to	12,0	22	24	20	10,67	28	13,06	d1+1,0	15	16	23	24	0,02
from	12,1	to	15,0	26	28	20	14,19	28	17,14	d1+1,0	15	16	23	24	0,02
from	15,1	to	18,0	30	32	20	-	28	21,58	d1+1,0	-	-	23	24	0,02

Increment of the bore d1 = 0.1 mm up to 15.0 and 0.5 mm over 15.0.
Intermediate sizes are available at extra cost.

Quantity discounts
for DIN 9845, type B