DIN 9845 A

Material: HSS

Execution:
hardened and tempered, ground to tolerance inside and outside.

Hardness: HRC 62 ±2

Ordering example for a cutting bush, type A with d1 = 8 mm and L = 20 mm:
Cutting bush DIN 9845 A 8.0 x 20

Bore d1 H8				d2 n6	short L1	Euros es.	long L1	Euros ea.	d4	short L2	long L2	t
			1,0	5	20	12,64	28	15,15	d1+0,3	18	26	0,01
from	1,1	to	2,0	6	20	8,61	28	11,13	d1+0,3	17	25	0,01
from	2,1	to	3,0	7	20	7,19	28	9,00	d1+0,5	17	25	0,01
from	3,1	to	4,0	8	20	7,19	28	9,00	d1+0,5	17	25	0,01
from	4,1	to	5,0	10	20	7,19	28	9,00	d1+0,7	16	24	0,01
from	5,1	to	6,0	12	20	7,19	28	9,00	d1+0,7	16	24	0,02
from	6,1	to	8,0	15	20	7,73	28	9,67	d1+0,7	16	24	0,02
from	8,1	to	10,0	18	20	8,61	28	10,25	d1+1,0	16	24	0,02
from	10,1	to	12,0	22	20	8,87	28	10,82	d1+1,0	15	23	0,02
from	12,1	to	15,0	26	20	11,70	28	14,19	d1+1,0	15	23	0,02
from	15,1	to	18,0	30	20	-	28	19,44	d1+1,0	-	23	0,02

Increment of the bore d1 = 0.1 mm up to 15.0 and 0.5 mm over 15.0.
Intermediate sizes are available at extra cost.

Quantity discounts
for DIN 9845, type A